GPS GEODETIK HI-TARGET C10
Rp 0
Deskripsi
GPS Geodetic Hi-Target C10 merupakan GNSS RTK generasi terbaru yang ringan dan praktis, diciptakan untuk mendukung kebutuhan konstruksi dan rekayasa teknik. Dirancang agar mudah dibawa, sederhana digunakan, dan tahan lama, C10 menghadirkan teknologi positioning GNSS canggih dengan dukungan software yang intuitif.
Baik digunakan oleh surveyor profesional maupun insinyur lapangan tanpa pengalaman survei mendalam, C10 tetap memberikan hasil pengukuran yang presisi dan andal di kondisi lapangan paling berat. Inilah solusi sempurna untuk pengukuran konstruksi dan manajemen proyek di lapangan.
GPS Geodetic Hi-Target C10 merupakan GNSS RTK generasi terbaru yang ringan dan praktis, diciptakan untuk mendukung kebutuhan konstruksi dan rekayasa teknik. Dirancang agar mudah dibawa, sederhana digunakan, dan tahan lama, C10 menghadirkan teknologi positioning GNSS canggih dengan dukungan software yang intuitif.
Baik digunakan oleh surveyor profesional maupun insinyur lapangan tanpa pengalaman survei mendalam, C10 tetap memberikan hasil pengukuran yang presisi dan andal di kondisi lapangan paling berat. Inilah solusi sempurna untuk pengukuran konstruksi dan manajemen proyek di lapangan.
Spesifikasi Hi-Target C10 GNSS Receiver
GNSS Signal
Channel: 1408
GPS: L1C/A, L1C, L2P(Y), L2C, L5
BDS: B1I, B2I, B3I, B1C, B2a, B2b
GLONASS: L1, L2, L3
Galileo: E1, E5a, E5b, E6
QZSS: L1, L2, L5, L6*
NavIC: L5
SBAS: L1, L2, L5
PPP: B2b-PPP, Galileo E6-HAS
Positioning Performance
High-Precision Static: H: 2.5 mm + 0.1 ppm RMS | V: 3.5 mm + 0.4 ppm RMS
Static and Fast Static: H: 2.5 mm + 0.5ppm RMS | V: 5 mm + 0.5ppm RMS
Post Processing Kinematic (PPK / Stop & Go):
H: 8mm + 1ppm RMS | V: 15mm + 1ppm RMS
Initialization time: Typically 10 min for base and 5 min for rover
Initialization reliability: Typically>99.9%
PPP: H: 10cm | V: 20cm
Code differential GNSS positioning: H: ±0.25m+1ppm RMS | V: ±0.5m+1ppm RMS SBAS: 0.5m (H), 0.85m (V)”
Real Time Kinematic (RTK):
H: 8mm+1ppm RMS | V: 15mm+1ppm RMS
Initialization time: Typically 99.9%”
Positioning rate: 1 Hz, 5 Hz and 10 Hz
Time to first Fix: Cold start:< 45s | Hot start:< 30s | Signal re-acquisition:< 2s
Hi-Fix: H: RTK+10mm / minute RMS | V: RTK+20mm / minute RMS
Tilt Survey Performance: Additional horizontal pole-tilt uncertainty typically less than 8mm+0.7mm/°tilt(0~60°)
Physical
Dimensions (W x H): 132mm × 67mm
Weight: ≤ 0.8kg(includes battery)
Operation temperature: -30℃~+70℃
Storage temperature: -40℃~+80℃
Humidity: 100% non-condensing
Water/dustproof: IP68 dustproof, protected from temporary immersion to a depth of 1m (3.28ft）
Free fall: Designed to survive a 2m(6.56ft) natural fall onto concrete
Electrical
Internal Battery:
Internal 7.2V / 6900mAh lithium-ion rechargeable battery
RTK rover(UHF/Cellular): up to 24 hours
External power:
Using standard smartphone chargers or external power banks
(Support 5V 2.8A Type-C USB external charging)
Communication
I/O Interface: 1 × USB type C port; 1 × SMA antenna port
Wi-Fi: Frequency 2.4GHz, supports 802.11 b/g/n
Bluetooth: 4.2 / 2.1+EDR, 2.4GHz
NFC: Near field communication for device touch pairing
Internal UHF Radio:
Frequence: 410MHz~470MHz
Protocol: HI-TARGET, TRIMTALK450S, TRIMMARK III, SATEL-3AS, TRANSEOT, etc.
Working Range: Typically 3~5km, optimal 8~15km
Channel: 116（16 scalable）
Control Panel
Physical button: 1
LED Lights: Satellite, Signal, Power
System Configuration
Storage: 16GB ROM internal storage
Output format: ASCII: NMEA-0183
Output rate: 1Hz~20Hz
Static data format: GNS, Rinex
Real Time Kinematic (RTK): RTCM2.X, RTCM3.X
Network Mode: VRS, FKP, MAC, Support NTRIP protocol
GNSS Signal
Channel: 1408
GPS: L1C/A, L1C, L2P(Y), L2C, L5
BDS: B1I, B2I, B3I, B1C, B2a, B2b
GLONASS: L1, L2, L3
Galileo: E1, E5a, E5b, E6
QZSS: L1, L2, L5, L6*
NavIC: L5
SBAS: L1, L2, L5
PPP: B2b-PPP, Galileo E6-HAS
Positioning Performance
High-Precision Static: H: 2.5 mm + 0.1 ppm RMS | V: 3.5 mm + 0.4 ppm RMS
Static and Fast Static: H: 2.5 mm + 0.5ppm RMS | V: 5 mm + 0.5ppm RMS
Post Processing Kinematic (PPK / Stop & Go):
H: 8mm + 1ppm RMS | V: 15mm + 1ppm RMS
Initialization time: Typically 10 min for base and 5 min for rover
Initialization reliability: Typically>99.9%
PPP: H: 10cm | V: 20cm
Code differential GNSS positioning: H: ±0.25m+1ppm RMS | V: ±0.5m+1ppm RMS SBAS: 0.5m (H), 0.85m (V)”
Real Time Kinematic (RTK):
H: 8mm+1ppm RMS | V: 15mm+1ppm RMS
Initialization time: Typically 99.9%”
Positioning rate: 1 Hz, 5 Hz and 10 Hz
Time to first Fix: Cold start:< 45s | Hot start:< 30s | Signal re-acquisition:< 2s
Hi-Fix: H: RTK+10mm / minute RMS | V: RTK+20mm / minute RMS
Tilt Survey Performance: Additional horizontal pole-tilt uncertainty typically less than 8mm+0.7mm/°tilt(0~60°)
Physical
Dimensions (W x H): 132mm × 67mm
Weight: ≤ 0.8kg(includes battery)
Operation temperature: -30℃~+70℃
Storage temperature: -40℃~+80℃
Humidity: 100% non-condensing
Water/dustproof: IP68 dustproof, protected from temporary immersion to a depth of 1m (3.28ft）
Free fall: Designed to survive a 2m(6.56ft) natural fall onto concrete
Electrical
Internal Battery:
Internal 7.2V / 6900mAh lithium-ion rechargeable battery
RTK rover(UHF/Cellular): up to 24 hours
External power:
Using standard smartphone chargers or external power banks
(Support 5V 2.8A Type-C USB external charging)
Communication
I/O Interface: 1 × USB type C port; 1 × SMA antenna port
Wi-Fi: Frequency 2.4GHz, supports 802.11 b/g/n
Bluetooth: 4.2 / 2.1+EDR, 2.4GHz
NFC: Near field communication for device touch pairing
Internal UHF Radio:
Frequence: 410MHz~470MHz
Protocol: HI-TARGET, TRIMTALK450S, TRIMMARK III, SATEL-3AS, TRANSEOT, etc.
Working Range: Typically 3~5km, optimal 8~15km
Channel: 116（16 scalable）
Control Panel
Physical button: 1
LED Lights: Satellite, Signal, Power
System Configuration
Storage: 16GB ROM internal storage
Output format: ASCII: NMEA-0183
Output rate: 1Hz~20Hz
Static data format: GNS, Rinex
Real Time Kinematic (RTK): RTCM2.X, RTCM3.X
Network Mode: VRS, FKP, MAC, Support NTRIP protocol
Diskusi